GLS
Apr 19, 05:15 AM
I've done the following once a week on all the laptops we have here, without worry:
-Rubbing alcohol on old washcloth. Takes care of case, keyboard, touchpad, wrist area. Don't saturate the washcloth; just enough to dampen it, then wipe all the surfaces except screen.
-Eyeglass cleaner from drugstore for display. Comes in small spray bottle. Use it with a microfiber cloth for the display. Same as with rubbing alcohol; just enough to dampen the cloth, then wipe display.
Enjoy.
-Rubbing alcohol on old washcloth. Takes care of case, keyboard, touchpad, wrist area. Don't saturate the washcloth; just enough to dampen it, then wipe all the surfaces except screen.
-Eyeglass cleaner from drugstore for display. Comes in small spray bottle. Use it with a microfiber cloth for the display. Same as with rubbing alcohol; just enough to dampen the cloth, then wipe display.
Enjoy.
gattamelata
Jun 18, 08:32 PM
park on the 4th floor. enter the garage from joppa rd. if there's a line, this is probably where it is.
robotrenegade
Jul 6, 08:06 PM
I'm glad i did what i did or i would of ended up paying for another IP address.:D
Keebler
Mar 5, 09:56 AM
I am too new at CS5 to be of much help, but I wonder if this would be of any help to you (?):
a. Take a good quality RAW photo of the picture, and open this RAW image in Camera Raw as a Smart Object. See if you can adjust the area that is too light (left of the photo).
b. Now, double-click on the image shown in the Layers panel, which in turn will open a layer of the image in Camera Raw. Now adjust the dark side of the image, and then click on "Done." The result is two layers blended into one.
-------------
Thanks AlaskaMoose. I should have mentioned this is a negative. I would definitely try your method if it was a photo.
a. Take a good quality RAW photo of the picture, and open this RAW image in Camera Raw as a Smart Object. See if you can adjust the area that is too light (left of the photo).
b. Now, double-click on the image shown in the Layers panel, which in turn will open a layer of the image in Camera Raw. Now adjust the dark side of the image, and then click on "Done." The result is two layers blended into one.
-------------
Thanks AlaskaMoose. I should have mentioned this is a negative. I would definitely try your method if it was a photo.
Rapscallion
Apr 8, 03:39 PM
Yes this has happened to me. I usually power cycle my monitor and its back to normal. I think this has something to do with video drivers, come to think of it I dont think it has happened since the last OSX update.
w_parietti22
Sep 24, 09:38 PM
No, I dont no your name... let me guess it starts with an "r"?
edit- just looked at your resume... now I know. :D
edit- just looked at your resume... now I know. :D
B.A.T
Feb 8, 07:25 AM
Last weekend I picked up the 2.6 ghz model with 2 gbs of ram. I'm planning on upgrading the ram to 4 gbs because I'm under the impression that this is the most you can put in the machine. However, in looking at info on the mac mini wikipedia site it says that the mini is Expandable to 8 GiB (4 GiB supported by Apple)
So how much ram will work in this machine? Can it really handle 8gbs?
So how much ram will work in this machine? Can it really handle 8gbs?
elppa
Nov 24, 02:21 PM
It's colour, so it's complicated and could be due to any one of a number of issues.
Here's something to try.
[1] Open �Save for Web and Devices�.
[2] Click on the triangle above the settings pane. Choose �convert to sRGB�
[3] Click on the triangle above the preview pane. Choose �Use Document Colour Profile�.
The second step is to preview the colour accurately.
Here's something to try.
[1] Open �Save for Web and Devices�.
[2] Click on the triangle above the settings pane. Choose �convert to sRGB�
[3] Click on the triangle above the preview pane. Choose �Use Document Colour Profile�.
The second step is to preview the colour accurately.
Surely
Apr 21, 12:34 PM
No thanks. This has been discussed before; you can post a link to your Youtube video and people can choose to load it that way.
I agree! No thanks!
How do you embed youtube videos in posts here (http://forums.macrumors.com/showthread.php?t=861736&highlight=youtube)
Embedded YouTube on the forum? (http://forums.macrumors.com/showthread.php?t=670438&highlight=youtube)
[VIDEO] Tags? (http://forums.macrumors.com/showthread.php?t=1061846&highlight=video)
Can I post a video in this forum?? please help. (http://forums.macrumors.com/showthread.php?t=729976&highlight=video)
Embedding video in a post... (http://forums.macrumors.com/showthread.php?t=529396&highlight=video)
How about a video Gallery? (http://forums.macrumors.com/showthread.php?t=220134&highlight=video)
Video Gallery? (http://forums.macrumors.com/showthread.php?t=207968&highlight=video)
I guess it pays to ask again.
0A5t5_O8hdA
I agree! No thanks!
How do you embed youtube videos in posts here (http://forums.macrumors.com/showthread.php?t=861736&highlight=youtube)
Embedded YouTube on the forum? (http://forums.macrumors.com/showthread.php?t=670438&highlight=youtube)
[VIDEO] Tags? (http://forums.macrumors.com/showthread.php?t=1061846&highlight=video)
Can I post a video in this forum?? please help. (http://forums.macrumors.com/showthread.php?t=729976&highlight=video)
Embedding video in a post... (http://forums.macrumors.com/showthread.php?t=529396&highlight=video)
How about a video Gallery? (http://forums.macrumors.com/showthread.php?t=220134&highlight=video)
Video Gallery? (http://forums.macrumors.com/showthread.php?t=207968&highlight=video)
I guess it pays to ask again.
0A5t5_O8hdA
VanneDC
Mar 19, 11:37 PM
no worries, glad to be of help govner,
depending on what your going to be using the G5 for mate, be very sceptical about getting caught up in the G5 upgrade current. The quicker 2.3 are not actually much quicker at all (cept the dual core models) and the 1.8ghz dualie runs great. I sometimes wish i handent sold mine. The 2.3ghz i have atm isnt that much quicker than the 1.8 i had before.
Vid cards make a massive diff in the G5 and with that 9800 pro you've got a great little card in your box. Just make sure you give it enough ram to function properly. I would recommend 2gig and upwards and as much as you can afford or scavenge.
I have 6gb in my 2.3 atm and it hoots.. esp if your going to be going with leopard. (which i recommend that you do )
that said, in regards to ram, try and grab all the same sticks. I have a mixed bag of nuts in mine and it does take longer to check the ram that it would with only 2 or 4 sticks in there. (cos i am a cheap skate, i even have several 256mb sticks in there, which are pretty useless :)
let us know how you get on and what sort of work your G5 will be doing..
cheerio
depending on what your going to be using the G5 for mate, be very sceptical about getting caught up in the G5 upgrade current. The quicker 2.3 are not actually much quicker at all (cept the dual core models) and the 1.8ghz dualie runs great. I sometimes wish i handent sold mine. The 2.3ghz i have atm isnt that much quicker than the 1.8 i had before.
Vid cards make a massive diff in the G5 and with that 9800 pro you've got a great little card in your box. Just make sure you give it enough ram to function properly. I would recommend 2gig and upwards and as much as you can afford or scavenge.
I have 6gb in my 2.3 atm and it hoots.. esp if your going to be going with leopard. (which i recommend that you do )
that said, in regards to ram, try and grab all the same sticks. I have a mixed bag of nuts in mine and it does take longer to check the ram that it would with only 2 or 4 sticks in there. (cos i am a cheap skate, i even have several 256mb sticks in there, which are pretty useless :)
let us know how you get on and what sort of work your G5 will be doing..
cheerio
dan-o-mac
Dec 9, 06:20 PM
Are you open to any trades? I have a 4GB White Nano that I'm looking to trade.
andrewr2123
May 5, 02:49 PM
For about 2 seconds I thought they were actually phones :o
lol though!
lol though!
darylsudden
Mar 15, 06:48 AM
I'm pretty sure I'm not the only one going? ;)
yg17
Apr 30, 10:04 AM
My mom and dad both have a Samsung Strive on AT&T and it doesn't require a data plan, and if they can figure out how to use it, then anyone can.
solvs
Sep 12, 09:48 PM
It would have been nice to put OS X on my fairly new 1.3 AMD, or even the 1.6 P4 at work (if nothing else than to save the TORTURE that was my Win98/2000 install from HELL, freakin' M$. Now I can Crash twice as fast!). But we know that won't be happening anytime soon.
Can't wait to get a new Mac to replace my old one (that I no longer have BTW) after I move. Maybe a nice Cool (pun intended) iBook (c'mon 1 GHz G3 + 32 MB vid card), or an eMac to play with untill I can afford a new Tower. Who knows what we'll have by then?
GigaHertz, shmigahertz. If I can run FCP off of a 320 GB hard drive in almost real-time with out the crashing, I'll be happy.
Another couple of months.
We'll see what happens.
Can't wait to get a new Mac to replace my old one (that I no longer have BTW) after I move. Maybe a nice Cool (pun intended) iBook (c'mon 1 GHz G3 + 32 MB vid card), or an eMac to play with untill I can afford a new Tower. Who knows what we'll have by then?
GigaHertz, shmigahertz. If I can run FCP off of a 320 GB hard drive in almost real-time with out the crashing, I'll be happy.
Another couple of months.
We'll see what happens.
l.a.rossmann
Apr 6, 04:37 PM
Punch it in the screen.
Le Big Mac
May 3, 03:17 PM
Unless they change the power supply the only thing really to update is either the price or the capacity.
I thought they had fixed the capacitor problem. The first batch (1 year+) was dying, but have they continued to die for newer models?
I thought they had fixed the capacitor problem. The first batch (1 year+) was dying, but have they continued to die for newer models?
John J Rambo
Apr 6, 04:05 PM
Hi guys,
Im completely new to php and I'm trying link a php script to this form I have:
<form action="contactformprocess.php" method="post">
<fieldset>
<label for="name">Name:</label>
<input type="text" name="name" placeholder="Enter your full name" />
<label for="email">Email:</label>
<input type="email" name="email" placeholder="Enter your email address" />
<label for="message">Message:</label>
<textarea name="message" placeholder="What's on your mind?"></textarea>
<input type="submit" value="Send message" name="submit"/>
</fieldset>
</form>
I cant see anything wrong with this form and i have linked a php mailer script to it but I'm not receiving the email...
I'm testing it live by the way.
thank in advance...
Im completely new to php and I'm trying link a php script to this form I have:
<form action="contactformprocess.php" method="post">
<fieldset>
<label for="name">Name:</label>
<input type="text" name="name" placeholder="Enter your full name" />
<label for="email">Email:</label>
<input type="email" name="email" placeholder="Enter your email address" />
<label for="message">Message:</label>
<textarea name="message" placeholder="What's on your mind?"></textarea>
<input type="submit" value="Send message" name="submit"/>
</fieldset>
</form>
I cant see anything wrong with this form and i have linked a php mailer script to it but I'm not receiving the email...
I'm testing it live by the way.
thank in advance...
LastLine
Apr 15, 07:20 PM
Like someone else said, it's likely that it'll only be exclusive's that show a major difference - and in that case, it comes down to not so much what power is there, as to how it's used. Take two exclusive's to the 360 for example. Dead or Alive 4 - goregous graphics, very high detail and not much on screen at once. Dead Rising - realistically prev gen graphics, but done en-mass, using the consoles capabilities to produce hoards and hoards of zombies.
I think that makes sense anyway.
I think that makes sense anyway.
danwilliams
Apr 22, 03:18 PM
I am not fluent in Perl but I do use Python at my work. I am mainly a C++ developer. I find Python easy to use and quite powerful for the things you listed. There are many 3rd party libraries that will help with most things you need to do. A SSH client called Paramiko was VERY helpful to me for logging into servers and transferring files and running commands. This site may help get you started with Python and Paramiko's SSH library.
http://jessenoller.com/2009/02/05/ssh-programming-with-paramiko-completely-different/
As for the file and string manipulations you listed, I find just doing a google search is helpful enough.
Just make sure you get a Python debugger if you go that way. I use Eclipse with Pydev. I am sure others may suggest a better debugger. It is adequate for my needs.
http://jessenoller.com/2009/02/05/ssh-programming-with-paramiko-completely-different/
As for the file and string manipulations you listed, I find just doing a google search is helpful enough.
Just make sure you get a Python debugger if you go that way. I use Eclipse with Pydev. I am sure others may suggest a better debugger. It is adequate for my needs.
EazyWeazy3
Jan 24, 06:10 PM
Forgive me if this has been answered before.
Just wondering why there isn't a Marketplace or a Buy/Sell forum on here?
Was there one before? Is there one now and I'm just not seeing it?
Just been curious as to why there isn't one. I'm sure lots of members have a bunch of goodies they want to get rid of and people are always in the market for new toys and gadgets.
Hopefully someone can shed some light on the situation for me.
Thanks.
Just wondering why there isn't a Marketplace or a Buy/Sell forum on here?
Was there one before? Is there one now and I'm just not seeing it?
Just been curious as to why there isn't one. I'm sure lots of members have a bunch of goodies they want to get rid of and people are always in the market for new toys and gadgets.
Hopefully someone can shed some light on the situation for me.
Thanks.
TRUCRACKER
Aug 17, 10:00 PM
Wow for free?! Lucky man
Angelo95210
Mar 31, 03:53 AM
Check for poorman steadycam on Google. You can build one for $19, pretty effective actually.
treynolds
Nov 16, 02:39 PM
http://lh3.ggpht.com/_6s2PsZVD_fk/TOLrt6QV3oI/AAAAAAAACtk/sPtNMklqaEw/s720/Screen%20Shot.jpg